>> Back to the Software Setting Guide Windows List
Reconfigure your computer settings
For Windows Me

Keep the information below on hand. This information was displayed on your browser when you signed-up for our service, orgiven in the Quick Reference sheet we send by postal mail with the Access Information Sheet.

You will see the following items written in green letters throughout this manual. Please enter your own information wherever these items appear.
- User Login Name
- User Login Password
- Access Point Number

-- Configure Dial-Up Netwoking.

1. Double click on "My Computer" and "Control Panel", and "Network and Dial-up Connections". Then, please double click on "Make New Connection".
2. Enter the followings:

[Type a name for the computer you are dialing:]

[Select a device:]
Select your modem

Click on [Next(N) >] button

3. Enter the followings:

[Area Code(R):]
area code of the Access Point Number
[Telephone Number (T):] 
phone number of the Access 
Point Number

[Country code (U):] 
Select [Japan (81)] 

Click on [Next (N) >] button

Click on [Finish]
5. Double click on [SpinNet] icon
6. Click on [Properties] button.
7. Check [Use area code and Dialing Properties]

Check the information shown in[General] tab.

[Area Code:] 
area code for Access Point Number
[Telephone Number:] 
phone number of Access Point Number
[Country code:] 
Select [Japan (81)]

8. Click on [Networking] tab and check the following configuration:

[Type of Dial-Up Server:] 
PPP:Internet,Windows2000/NT, WindowsME

[Advanced options:] 
Remove all check marks

[Allowed network protocols:]
Check only [TCP/IP]

9. Click on [Security] tab

[User name:] 
Connect Login Name

(eg. 12345678@tka.jpn)
Connect Password

[Connect automatically] 
no check

[Advanced security options:] 
no check marks

10. Click on [Dialing] tab and configure the followings: 

Check on
[This is the default Internet connection]
[Always dial my default connection]

Check on 
[Enable idle disconnect]

Check on 
[Disconnect when connection may not be needed]

Click [OK] button

11. Select [SpinNet] from the pull down menu.

Confirm the settings as follows
[User name:] 
Connect Login Name

Connect Password

No check on [Connect automatically] 

Click on [Dial Properties]

12. Confirm and change the settings as follows:

[I am in this country/region:] 
[Area code:] 
area code of your location

[To access an outside line:] 
If you need to dial a certain number to access an outside line to make a phone call from the number where you are at now, please enter this number 

[Dialing:] Choose [Tone dial] or [Pulse dial]
If you are using a touch tone phone select Tone dial, if not, then select Pulse dial.

[Number to be dialed:] 
actual number to be dialed

Click [OK] button.

13. Confirm [Phone number:] and click on [Connect]
(The shown number is the actual number that your PC is going to dial)

The settings for connection to the Internet are now complete. Welcome to SpinNet!
Setting Guide for many kinds of software such as ftp, mail and news, is also available.