Double-click on the "TCP/IP" icon to open it in the "Control Panels" folder.
2.
TCP/IP
Connect via:
Select PPP
Configure:
Select Using PPP Server
Name server addr:
Type 192.168.17.1
3.
Close the "TCP/IP" window. A dialog box appears that asks whether you wish to save the configuration or not. Click "Save".
4.
Open "Modem" in the "Control Panels" folder.
5.
Modem
Connect via:
Select the port to which the modem is connected. (ex. Modem Port.)
Modem:
Select the modem you are using.
Sound:
Select On
Dialing:
Select the line type of your phone line (either Tone or Pulse)
* If you are dialing from a hotel room or office, please check "Ignore dial tone".
6.
Close the "Modem" window. A dialog box that asks whether you save the configuration or not. Click "Save".
7.
Open "Remote Access" in the "Control Panels".
8.
Remote Access
Select "Registered User".
Name:
Type signup
Password:
Type signup
* Both should be written in small letters * Password when typed will be displayed as "*".
Number:
Type 03-5324-7850
9.
Click on the "Options" button.
10.
Click on the "Protocol" tab and configure as follows.
Use protocol:
Select PPP
Connect automatically when starting TCP/IP applications:
should be selected.
Allow error correction and compression in modem:
should be selected.
Use TCP header compression:
should be selected.
Connect to a command-line host:
should not be selected.
11.
Click the "OK" button, and then close the "Remote Access" window. A dialog box appears that asks whether you wish to save the configuration or not. Click "Save".
12.
The configuration for connection is now complete.
2.In this section, you will sign up for our service using the dial up icon you created earlier. You will need to print out or copy down the following instructions for later reference.
1.
Open the "Remote Access" icon to open, and then click on the "Connect" button. Your computer will begin to connect.
2.
When the connection is established, a small icon will flash in the Apple Mark area at the top-left corner of your display.
3.
Click(select) as follows:
Apple Menu
--> InternetAccess
--> Browse the Internet
4.
When launching the browser, the dialog box below may appear. click "Yes" since the computer has already been set up.
5.
The following dialog box may appear when launching the browser. This is not a problem. Simply click on the "OK" button.
6.
After launching the browser, open new window and type:
"http://regist.spinnet.jp/index_en.html"
in the "Address" field near the top of your browser window, then press the "Return" key.
7.
The online registration page will appear. Please read the service information and contract, and follow the instruction on the screen.
When the sign-up is completed, your Connect Login Name and Connect Password will be displayed on the screen. Be sure to write down the information displayed and keep it in a safe place so the information will not be abused by a third party. The sign-up is successful when your Connect Login Name and Connect Password are displayed. Even if ,for some reason, you are disconnected after the Connect Login Name and Connect Password are displayed, there is no need to sign up again. If you have any questions about this, please call the Customer Support Center.
8.
The connection is still active even if you quit the browser. To quit the connection, click (Select) as follows:
